If you consider the SmartThings app (and all the other SmartApps within) confusing then this may be just what you’ve been looking for.
SmartRules is a 3rd party app from obycode that promises to make it simpler to program powerful If While Then logic for your SmartThings system.
This weekends latest release (v1.4) includes first time support for UK SmartThings users too.
Kurmak
When you launch the app for the first time you connect it to your hub through the SmartThings Cloud.
Then you choose which devices you want to be controlled by SmartRules. It would be good to have a ‘select all’ option here rather than have to tick each individual device, but the developers tell us Samsung do not allow this option.
If you subsequently add a new device to your system you have two options to included it. First, you can logout and go through the setup process again to add it (your existing Rules are all safely retained). alternatively you can access the SmartRules SmartApp from the official SmartThings app on your device and add it there.
Güvenlik
SmartRules takes advantage of officially supported SmartTings APIs and we asked the developers to comment on the safety and security aspects of the app…
SmartRules presents the authorization flow from SmartThings over HTTPS, where the user enters their username and password. This username and password are never seen or collected by SmartRules. during the authorization process, the user selects which devices SmartRules is allowed to access; devices not selected during this process are inaccessible by SmartRules. When the authorization process completes, SmartThings offers SmartRules a protected token to use for even more communication which is saved securely in the iOS keychain. At anytime (for example, if a device with SmartRules installed is lost or stolen) a user can simply delete the SmartRules SmartApp and it will no longer have access to anything.
Building the Logic
Once setup is completed you can get straight into building your ‘Rules’ which is an incredibly simple process carried out with a few taps on your smartphone. Each rule consists of three parts.
Triggers – Choose how you want to launch your rule from a huge variety of options. The If can be a basic time event, motion detection, energy usage, luminance or nearly any state of or value from the devices on your SmartThings network.
Conditions – This part is optional but it’s where the power lies, only performing the action While certain conditions are true. You can for example turn a light on While it’s dark. If you decide to use multiple conditions (eg motion Detected, Door is Open) you can select whether All or Any of these situations are required to be met before the action fires.
Actions – The resultant then output of your rule. options include running routines, speaking text, sending push notifications, locking / unlocking, turning on / off (plus the useful ‘toggle’ command) dim / brighten, take a picture etc.
It’s worth noting that the ‘after sunset’ and ‘before sunrise’ conditions both essentially imply ‘dark’ and there’s no need for the 2 conditions (after sunset, before sunrise) in your logic. There’s currently no way to add a plus or minus value to sunrise or sunset values (eg turn outside lights on 30 mins before sunset), but this is on the developers to do list. check out the current list of Triggers, conditions and actions at the bottom of this page. You assign each guideline an icon and there’s one of the best choices of graphics I’ve seen here (almost 250) to represent tasks.
QuickTap
It’s not immediately apparent what the ‘QuickTap’ set off is, but it’s a widget that adds a helpful way of triggering your Rules from buttons on your Today screen (the pull-down-from-the top quick access panel on your iPhone).
In addition SmartRules supports the Apple view giving you a way to set off those same guidelines that are on your Today screen from your wrist.
You Rule
As well as their commitment to adding new Triggers, Conditions, actions in the future, obycode tell us there are many UI improvements planned for the major v2.0 update that’s in the works.
SmartRules Lite is a totally free version of the app so you can have a try before you buy the fully featured version (currently £4.99).
There are plenty of other logic contractors and guideline machines available for SmartThings, but it you want an easy life we can heartily recommend SmartRules.
smartrulesapp.com : More SmartThings Posts
Eğer bu olursa
Zaman
Gün doğumu gün batımı
QuickTap (Today screen and Apple Watch)
Mode is activated/deactivated
Acceleration sensor starts/stops moving
Alarm siren/strobe/both turn on/off
Beacon arrives/leaves
Button is held/pressed
Contact sensor is opened/closed
CO is detected/cleared/tested
Dimmer level goes above/below/equal to value
Door is opening / opened / closing / closed / unknown
Energy goes above/below/equal değeri
Nem yukarı/aşağı/değere gider/değere eşittir
Aydınlık, değere eşit/aşağı/eşit olur
Kilit kilitli/kilidi açıldı
Hareket sensörü hareket / hareket uçlarını algılar
Müzik çalar oynamaya başlar / duraklamaları / sessizliği / unututes’i durdurur
Güç, değere eşit/aşağı/eşit olur
Anahtar Aç/Kapalı
Sıcaklık, değerin üstüne/altına/değerine eşit olur
Su sensörü ıslak/kuru hale gelir
Valf açıldı/kapalı
Bu doğru olsa da
Zaman öncesi/sonra değer
Zaman, gün doğumu/gün batımından önce/sonra
Haftanın günü
Mod etkin/aktif değil
Hızlanma sensörü hızlanmıyor/değil
Alarm sireni/flaş/her ikisi de açık/kapalı
Beacon mevcut/mevcut değil
Düğme tutulur/basılır
İletişim sensörü açık/kapalı
CO sensörü tespit/temiz/test ediyor
Dimmer seviyesi, değere eşit/altında/eşittir
Kapı açılıyor / açık / kapanıyor / kapalı / bilinmiyor
Enerji, değerin üstünde/altında/eşittir
Nem,/altında/değere eşittir
Aydınlık, değere eşit/altında/eşittir
Kilit kilitli/kilidi açıldı
Hareket sensörü hareketi algılamıyor/almıyor
Müzik çalar çalıyor / duraklatılıyor / sessiz / sessiz değil
Güç, değerin üstünde/altında/eşittir
Anahtar açık/kapalı
Sıcaklık,/altında/değere eşittir
Su sensörü ıslak/kuru
Valf açık/kapalı
O zaman bunu yap
Rutin veya merhaba çalıştırın, ev cümlesi
Modu Etkinleştir
SMS/Push Bildirimi aracılığıyla bilgilendirin
Bir anahtarı aç / kapatın veya değiştirin
Dimmer seviyesini ayarlayın
Alarm sireni/flaşı/her ikisini de aç/kapalı
Kamera ile fotoğraf çekin
Bir kapıyı aç/kapat
Kilitle Kilitle/Kilidini Aç
Anlık bir anahtara basın
Oynat/Duraklat/Dur/Sessiz/UNSUTE/SONRAKİ/ÖNCEKİ/SES CONTROL/POIN URL’si Bir Müzik Oynatıcısı
Bir konuşma sentezleyici ile metin konuşun
Beep a tone device
Open/close a valve
#
Ön izleme
Ürün
Değerlendirme
Fiyat
1
Samsung GP-WOU019BBDWG SmartThings smart plug 2019, Compatible with Amazon Alexa and Google Home,…
972 Reviews
£19.50
Amazon’da Satın Alın
2
SmartThings Aeotec Zigbee motion Sensor – automatic control of light integrated temperature sensor,…
34 Reviews
£34.99
Amazon’da Satın Alın
3
SmartThings Aeotec Zigbee Multipurpose Sensor – Window-Door Sensor for Burglary Alarm Security…
16 Reviews
£29.99
Amazon’da Satın Alın
smartrulesapp.com : More SmartThings Posts
Bunu Paylaş:
Facebook
Twitter
Reddit
LinkedIn
Pinterest
E -posta
Daha
Naber
Yazdır
Skype
Tumblr
Telgraf
Cep
Amazon Ürün Reklamcılığı API’sinden 2021-10-04 / Ortaklık Bağlantıları / Görüntüler hakkında son güncelleme